In-house manufactured magazine that will fit the CP1 / CP2, CR600W, and PR900W.

The rear is solid, allowing for full strength, as the spring adds tension onto this segment of the part w/ each torsion stroke (rotation of the pellet dial core)

The bottom side has a strong cylindrical neodymium magnet insert, 3mm deep by ?5mm, and will stiffly retain, resisting bumping from either left or right.

The pellet dial core itself has a 7-shot dial w/ broken circles. This is to break up rigidity, allowing flexibility, to prevent pellets, especially JSB's & GAMO's from cramping into a narrowed space.

The face is neat w/ an oblong window open where a number counter indicates the number of pellets left, instead of the ARTEMIS branded one's case, where the pellets dropped in has to be individually counted - the pellets in this magazine are pressed into their respective slots, not dropped in and neither do they have movement space in their respective slots, which, in transit, might cause the pellets to bump around in their individual slots against the aluminum sides of the ARTEMIS magazine.

This magazine is FULLY SELF-INDEXING, meaning that with each pellet chambered, the magazine will dial to the next slot.

Unlike the original, you do not need to dial the vinyl face all the way against the spring, turn the magazine around and then start loading up, starting with the last slotted pellet. With this magazine, you start with the first slot and dial the core up one slot at a time, inserting your pellets as such.

The central countersunk screw is fully stainless steel, not black oxide coated. Feel free to lightly adjust it if the magazine isn't properly indexing, however, all our magazines are subject to strict quality control; we ensure that they dial soap-smoothly with minimal friction, whilst the spring adds as little tension as possible on your pellets. This combined with the plastic core, ensures that your pellets are subject to the least amount of stress possible.

Spare parts for any part of this magazine available on-demand from us.

Lightweight doesn't have a paint job that can come off and leave an unpleasant appearance, in the form of burrs and nicks.

(Will work for the ARTEMIS SR900-S Sidelever cocking model as well)

�